Skip to content

Menu ▾

Products
By product category

Bench Scale Bench scales sit on a counter, table or stand and weigh small to medium loads for portioning, counting and check weighing. Platform size, capacity and the way results are recorded are what decide the model.

Checkweigher A checkweigher weighs each product as it moves along a line, compares the reading with a target weight and diverts units that fall outside the accepted band. Belt width, line speed and the reject device decide whether it fits the line.

Crane Scale Hanging scales for weighing suspended loads under a crane or hoist.

Floor Scale Low-profile platform scales for pallets, drums and general industrial weighing.

Forklift Scale Forklift scales weigh the load while it is on the forks, so a pallet can be checked during lifting or transport. Fork pocket size, maximum load and how the scale is powered on the truck decide the model.

Junction Box Junction boxes gather the cables from several load cells into one summed signal and one connection to the indicator. The number of cells, the cable layout and where the box is mounted decide the model.

Load Cell Sensors that convert force into an electrical weighing signal.

Packaging Equipment In-line equipment for packed product - metal detection, checkweighing, reject and conveying - sourced to fit an existing packing line.

Remote Display Remote displays repeat the live weight reading where an operator, driver or control room can see it from a distance, away from the indicator itself. The display only shows what the indicator sends it, so the indicator, the interface between the two and the cable run decide how it behaves.

Truck Scale Truck scales weigh a whole vehicle as a static load on a platform set into a pit or built on a foundation at ground level. The vehicles that use the yard, the foundation type and the traffic flow shape the layout.

Weighing Indicator A weighing indicator reads the signal from one or more load cells and shows the weight where the operator can act on it. Display size, keypad, outputs and the way it is mounted decide the model.
By application industry

Agriculture & Feed Farms, feed mills and grain handling, where weighing is done outdoors on bulk material and live loads.

Chemicals Chemical plants and stores, where drums, intermediate bulk containers and bulk bags of liquid or powder are weighed during receipt, batching and dispatch. The material and the area decide the build.

Food & Beverage Food and beverage plants weigh ingredients, portions and packed product in areas that are cleaned, chilled or wet.

Logistics & Warehousing Loading docks, warehouses and distribution depots, where goods are weighed as they arrive or leave. The vehicles and pallets in use, the yard layout and where the reading is recorded decide the equipment.

Manufacturing Production lines and workshops that weigh ingredients, parts or finished goods as part of the process. The task, the pace of the line and the data needed decide the equipment.

Mining & Construction Quarries, mines, concrete plants and building sites, where heavy loads of aggregate and bulk material are weighed in rough conditions. Capacity, impact and dust decide the build.
By use condition

Dry & Clean Indoor, dry and clean surroundings where dust and wash water are not part of daily operation. Readability and data handling usually matter more here than enclosure protection, but see the configuration.

Dusty Dust, powder or particles are present in normal operation. The instrument, junction boxes and cable entries are usually the first places dust causes trouble, and how the area is cleaned decides the rest.

High Capacity Heavy loads, high axle weights or large total capacity. Deck and beams, the foundation, and the number and rating of load cells have to be settled together rather than one at a time.

Outdoor Installed outdoors and exposed to sun, rain, wind and day-night temperature swings. Deck drainage, cable routing and the foundation are usually what decide how stable the readings stay.

Precision Weighing Applications where a fine division, not a large capacity, is the deciding factor. Accuracy depends on the whole installation — draft, vibration, temperature and calibration — not on the number of digits.

Wet / Washdown Areas where the scale is washed or exposed to water, steam and cleaning agents. How often water arrives, from which direction, and which cleaner is used decides how much sealing is needed.
Product images are placeholders.

All products Not sure which model fits? Send your working conditions. Send a requirement
Support
- Procurement support
- Start from what you need
Cases
- All cases
- By customer type
- By problem type
Knowledge
- All articles
- By topic
About us

Search

Inquiry list 0 Send a requirement

Cases

Filter:

Customer TypeDistributor End Bulk Buyer Repair & Maintenance System Integrator

Problem TypeCalibration & Accuracy Category Gap Filling Harsh Environment Project Integration Replacement Part

No cases match this filter. Show all cases

Novoweigh

One-Stop Weighing & Packaging Solutions

Company

About & Cooperation
Cooperation & After-sales
Privacy

Contact

sales@novoweigh.com

Contact us on WhatsApp