Replacement stainless steel shear beam load cells matched to the failed cells on a frozen food washdown platform scale, verified by nameplate data, mounting dimensions and wiring before supply.
Matching stainless steel shear beam load cells were supplied to replace failed cells under a platform scale on a washdown line. The customer could not stop production for a long survey, so the replacement was prepared from photos and nameplate data before the cells were ordered, and the set was checked again against the confirmed details before dispatch.
Because the new cells matched the capacity, mounting dimensions, cable entry and wiring of the originals, the scale was back in service without modification to the platform or the junction box. Verification rested on comparing the old cells’ nameplate data and installation dimensions with the proposed replacement, and on the customer confirming stable readings once the scale was running again.
Demo content: example data for layout preview only, not verified product information.
Customer Type and Problem Type
- Customer Type
- Repair & Maintenance
Companies whose own business is installing, repairing and servicing weighing equipment for their customers.
More about Repair & Maintenance
Repair and maintenance customers keep weighing equipment running for other businesses. They meet a wide range of scales in the field – platform scales, bench scales, indicators and load cells – and they often have to fit a part to an installation they did not build themselves.
What they need from a supplier is predictability: the same item available again later, a description that matches the unit on the floor, and enough dimensional and wiring detail to check a fit without a second site visit. When a scale has to go back into service quickly, the question is rarely what to buy but which item matches what is already installed.
Work in this group is therefore mostly identification – model, capacity, mounting, cable entry, thread – and keeping a record so that the next repair of the same type is faster than the last.
- Problem Type
- Replacement Part
Cases for one part - a load cell, indicator, junction box or cable - that has to fit equipment already in service.
More about Replacement Part
These cases are about one part, not one machine: a load cell, an indicator, a junction box or a length of cable that has to go back into equipment already in service. Nothing about the rest of the installation is up for change, so the whole outcome depends on identifying the part correctly.
Identification is done from what the customer can supply – a nameplate, a photograph, dimensions and a description of how the cable enters. The most common risk is a near-match: a part with the right capacity but the wrong thread, mounting hole spacing, cable entry or connector, which fits on paper and not on the scale. Reading the existing part carefully is cheaper than discovering the difference during the shutdown.
The second half of the work is timing. Most replacements are fitted during a planned stop, so the useful thing to settle early is what the scale has to do in the meantime, and whether the part can be checked against the existing one before it is committed to.
Project Context
The customer runs a frozen food line with a washdown platform scale. Several shear beam load cells under the platform had failed and were giving unstable readings, so the scale needed replacements that matched the existing cells in rating, size and wiring before the line could run normally again.
Work Process
We started from what the customer could send: photos of the fitted cells and their nameplates, the rated capacity and the mounting dimensions. From those we proposed a stainless steel shear beam cell with the same capacity, hole spacing, cable entry and output, and asked the customer to confirm cable length and wiring before dispatch. The cells were then supplied as one matched set for their maintenance team to fit.
Responsibility Split
Novoweigh sourced the cells, checked the specification against the customer's photos and nameplate data, and supplied them as a matched set. The installation partner removed the failed cells and refitted the replacements. The customer's maintenance team isolated the scale, provided the as-built details and confirmed the readings after the work.
Delivered Items
-
NW-LC-SB shear beam cell, rated capacity 500 kg, stainless steel body, IP67, rear cable entry with gland, output matched across the set to suit the existing junction box wiring
Quantity 4, supplied as one matched set
Verification
Before ordering we compared the nameplate data on the failed cells (model, rated capacity, output and wiring) with the proposed replacement, and checked installation dimensions and hole spacing against photos of the installed cells. Cable entry type, gland thread and conductor count were confirmed so the existing cable runs and junction box could be reused, and the set was checked again against the confirmed details immediately before dispatch.
Results
All four cells fitted the existing mounts without modification and the platform scale returned to service with stable readings. Because the set was supplied matched, no individual trimming was needed at the junction box.
Limitations
Demo example; the result described depends on the actual product supplied and on the conditions at the site, and the same checks of nameplate data, dimensions and wiring have to be repeated for each replacement enquiry.